Ranger RB24T

Product Description

Ranger RB24T Super‐Duty Truck Wheel Balancer with Drive‐Check™ Technology

 

 

The Ranger RB24T truck wheel balancer is a heavyweight wheel balancer suited especially for high‐volume commercial tire dealers and truck fleets. It handles tires up to 50 inches in diameter and 20 inches wide and rim sizes up to 30 inches in diameter. Although best suited for bus, truck and OTR wheels, it’s capable and fully equipped to accommodate automobiles and light truck wheels as well. Featuring Ranger’s proprietary Drive‐Check™ technology, it’s a powerful, vibration detection balancing solution that simulates road and driving speed conditions and measures computer‐generated imbalance of the tire and wheel assembly automatically. It then recommends the most cost effective weight optimization correction as needed which minimizes weight usage and maximizes productivity. An integrated wheel lift easily lifts the heaviest wheel assemblies for effortless mounting on the balancer. 

A full‐menu of time saving features include dynamic, static, and performance alloy settings allowing you to balance large and small wheel configurations with minimal effort and speed. Brightly displayed LED indicators mark the exact amount and location for wheel weight placement in mere seconds. Like all Ranger wheel balancers, the RB24T is commercial‐grade for perfectly balanced wheels day after day and around the clock. 


FEATURES:

Automatic Weight Optimization 

The RB24T truck wheel balancer automatically calculates the minimum amount of weight needed to achieve an optimal balance for the tire and wheel configuration so you use less weight which adds up to real savings and increases your bottom line. 

Drive‐Check™ Technology Proprietary Drive‐Check technology dramatically improves rotational measuring typically used to diagnose and repair ride disturbance complications. The highly precise RB24T performs a computer generated driving simulation then checks and measures the tire/wheel assembly for imbalance and possible run out of the rim and tire. With the RB24T, virtually all possible complaints due to rotational imbalance are eliminated before the wheel is mounted on the vehicle. 

User Friendly Operation 

A touch‐pad display panel simplifies speed entry of wheel data and helps guide technicians through balancing procedures. Operator function keys are labeled with simple, easy‐toread icons helping operators identify and command all balancing functions. Bright LED weight placement indicators show weight positions as the wheel is gently rolled to exact top‐dead‐center. A pneumatic braking system automatically engages and secures the wheel firmly in place as soon as the weight placement indicators are lighted and positioned at top‐dead‐center.

Highly Precise 
The highly precise and accurate RB24T features 64‐bit architecture and single‐chip technology for unprecedented speed and accuracy. Single‐chip 64‐bit architecture provides improved stability and accuracy along with greater application speed and data processing while using less hardware. By reducing hardware, service and maintenance costs are reduced and equipment life cycle is increased. An extremely fast dedicated hyper transport protocol allows data to communicate with the micro‐processor at much faster speeds resulting in lower power consumption, reduced heat and increased stability and accuracy.  

Three Phase Drive Motor 

Although versatile, single phase motors have their limitations, especially in heavy start‐up conditions. Single phase motors require special starting arrangements such as capacitors, additional windings and switches in order to get them turning under load. The RB24T features a robust 380V three‐phase drive motor to overcome these limitations and get heavy wheels spinning quickly. A built‐in digital solid‐state phase converter produces 3‐ phase output voltage regardless of single or three phase power supply. 

Multi‐Directional Quartz Piezoelectric Force Sensors 
The RB24T uses highly precise dual‐component piezoelectric quartz load sensors combined with a single digital rotation encoder that measure both longitudinal, transversal, and shear effects for multi‐directional force unbalance detection. The piezoelectric force sensors used on the RB24T are very sensitive and offer long‐term stability and freedom from fatigue for a service life that is virtually unlimited. The high rigidity quartz crystal sensors result in very high frequency detection in all three directions of measurement.  

Fully Equipped Multi‐Piece Wheel Mounting Adapter Kit – Everything is Included 

Quick‐Chuck Kit
 ‐ Our quick‐chuck kit reduces operator fatigue and decreases set‐up times dramatically. Installation and accuracy is not affected by the weight of wheel because auto‐centering hardened steel wheel‐holding supports lift, hold and automatically center heavy wheels with ease. Perfectly balanced three‐jaw chuck features a forged steel body and hardened wheel‐supports and gear slides. 

Adjustable Flange Plate and Stud Kit ‐ A universal flange plate kit features multi‐position interchangeable pins to provide quick setup and universal fitment. The kit adapts to varying lug bolt circles. 

Standard Cone Kit
 ‐ The RB24T tooling package includes a fully equipped six‐piece cone kit for full coverage of most all wheel configurations from cars and light trucks to super‐duty truck, bus and OTR. This well‐equipped package includes five standard cones and one dual tapered cone; individual cone sizes; 2.00‐2.75, 2.75‐4.00, 4.00 – 5.75, 6.00 – 6.50, 6.75 – 8.00, 8.25 – 9.00, and 10, 75 – 11.50.  

No More Heavy Lifting 

An integrated wheel lift helps technicians mount wheels effortlessly on the balancer preventing potential injuries and reducing fatigue. The 500‐pound capacity push‐button controlled wheel lift quickly raises the wheel to exact heights and a bearing mounted slider positions them for easy mounting. One handed operation means the technician’s free hand remains able to control the wheel assembly once it is lifted into the mounting position. 

Superior Stopping Power 

Heavy wheels need power assisted braking in order to safely reduce wheel spin. The faster the wheel starts and stops increases productivity and profits. The RB‐24T features electro‐magnetic pulse control combined with pneumatic braking to get heavy wheels stopping in mere seconds. The pneumatic braking system engages automatically as soon as the weight placement indicator is positioned at top‐dead‐center. Automatic air brakes hold wheels firmly in place during surface preparation and weight placement operations. Up‐front controls on the display panel allow you to engage and disengage the pneumatic brake with a simple push of a button.

$ 6,845.00 $ 8,180.00

CHEMICAL GUYS SHIPPING POLICY

Products will ship via FedEx or USPS

SONAX SHIPPING POLICY

Products will ship via FedEx or USPS

WALL CONTROL SHIPPING POLICY

Products will ship via FedEx or UPS directly from the manufacturer in Tucker, GA

SWISSTRAX SHIPPING POLICY

Products will ship via FedEx directly from the manufacturer in Indio, CA

BENDPAK/RANGER SHIPPING POLICY

FREE SHIPPING - DOMESTIC FREIGHT POLICY
(FREE SHIPPING APPLIES TO SELECT BENDPAK/RANGER PRODUCTS ONLY)

BendPak/Ranger products are drop shipped directly from the manufacturer in Santa Paula, CA.

Most BendPak/Ranger products include FREE commercial destination delivery; however, we suggest you contact us to see if your item qualifies. FREE SHIPPING items will be delivered freight prepaid to all direct shipping points located within the 48 continental United States. Accessory only shipments or service parts orders are generally not eligible for free freight. Orders for accessories or service parts are subject to a per piece freight charge based on package weight and destination zone.

BendPak will designate the freight carrier based on region and/or best service defined by their shipping department.  In the event a preferred carrier is requested, the customer will be responsible for paying an additional 5% freight surcharge at time of order.

REQUESTS FOR COD SHIPMENTS ARE NOT ACCEPTED. Items less than 150lbs will typically be shipped Fed Ex ground unless otherwise stipulated on the purchase order. Some items cannot be shipped via Fed Ex due to size, and weight and hazardous materials restrictions. Some items may also have additional hazardous-materials charges.

RURAL AREA TRANSPORTATION ZONES - SURCHARGE

FREE SHIPPING items located within a rural shipping area may be charged an incidental RATZ surcharge. Rural Area Transportation Zones are based on transportation lane accessibility and their functional accessibility to major highways and shipping lanes. Transportation and shipping to these remote and rural locations are usually non-direct shipping points with higher associated delivery costs. Refer to this link RATZ Check to see if you fall within a RATZ area.  Generally, ZIP codes within a RATZ Surcharge area are very rural and make up a small percentage of the US territory. 

ACCESSORIAL CHARGES – FREIGHT SURCHARGES

Even though FREE SHIPPING does apply to most domestic orders, in some cases accessorial charges may apply for specialized freight services beyond normal pick up, transport, and delivery. All Garage Enthusiast customers will be responsible for paying accessorial charges relating to their orders. The following list includes accessorial fees that will apply to each domestic order. These surcharges may be added at the time of invoice or after the merchandise has been delivered.

  • Lift Gate – If a shipment being delivered to a facility without a loading dock or adequate material handling equipment requires specialized lift gate service, a $145.00 fee will apply to the order. 
  • Residential Pick Up/Delivery – If a shipment is to be picked up or delivered to a residential area, a $50.00 fee will apply to the order. All orders void of a ship-to BUSINESS NAME will automatically be assumed to be residential delivery. 
  • Re-Delivery /Return Trip – A $75.00 charge will apply for each re-delivery.
  • Pre-Delivery Phone Notification/Appointments – A $5.00 charge will apply for notifying consignees of delivery. 
  • Waiting Time – A fee may be added if a delivery driver experiences significant wait time for a shipment to be unloaded. This charge would be based on the amount of time over and above what would be considered a normal delivery expectation.
  • Storage Charges – If the shipment is stalled for any reason, or needs to sit with the carrier for a specific delivery date, a storage fee may be charged for taking up space on a dock or in a truck. 
  • Special Delivery Destinations / Limited Access – A minimum $75.00 charge will apply to all shipments consigned to delivery points with limited or high-security access such as: schools, farms, military bases, prisons, government buildings, resort properties, trade-shows or convention centers, etc.
  • Reconsignment - If while in transit, the shipment needs to be reconsigned to an alternative location, then the outbound rate per mile will be applied from point of original delivery to the new destination point.

  • Returns A 20% restocking fee will be charged for merchandise returned to Garage Enthusiast. In addition, customers are also responsible for any and all applicable shipping charges incurred by Garage Enthusiast.

ORDER CHANGE FEES

  • Order change fee - ORDER IN PRODUCTION STAGE - There will be a $45 nonrefundable fee. If at a later time you decide to make another change after the previous one, there will be an additional $45 nonrefundable fee. If circumstances change and you must request an amendment to your order, be sure to make all changes at one time, to avoid multiple fees.

  • Order change fee - ORDER IN SHIPMENT STAGE - There will be a $75 nonrefundable fee for every change notification.

  • Order cancellation fee - ORDER IN PRODUCTION STAGE - If an order is cancelled after it reaches the production stage but before the shipment stage, there will be a $75 nonrefundable fee charged.

  • Order cancellation fee - ORDER IN SHIPMENT STAGE - If you cancel an order that has not yet shipped but has reached the final shipment stage, a non-refundable $125.00 service fee will be charged.

  • Order cancellation fee - AFTER ORDER HAS BEEN SHIPPED - A 20% restocking fee will be charged in addition to all applicable outbound and inbound shipping charges incurred by Garage Enthusiast.

ALASKA, HAWAII, US VIRGIN ISLANDS AND PUERTO RICO -

Additional freight charges will apply for all shipments destined for Alaska, Hawaii, US Virgin Islands and Puerto Rico. Additional freight charges also apply for expedited, guaranteed or definite delivery requests. Please contact your Garage Enthusiast for quotes prior to placing your order. 

FINAL DELIVERY

  • Garage Enthusiast will take no responsibility for additional charges of any kind that consignee may incur related to:
    • The renting or acquisition of equipment of any type necessary to unload items off of a delivering carrier's vehicle.
    • Any charges related to delivery of items to residential areas with restrictions on carrier vehicle size or weight unless such charges were prepaid prior to shipment.
    • Any charges related to delivery of items via lift-gate unless such charges were prepaid prior to shipment.

FREIGHT DAMAGE

Shipments should be thoroughly inspected by consignee as soon as they are received. The signed Bill of Lading is acknowledgement by the carrier of receipt in good condition of shipment covered by the Bill of Lading. If any of the goods called for on the Bill of Lading are shorted or damaged, consignees should not accept them until the carrier makes a notation on the freight bill of the shorted or damaged goods.

CONCEALED DAMAGE 

Shipments should be thoroughly inspected by consignee as soon as they are received. The signed Bill of Lading is acknowledgement by the carrier of receipt in good condition of shipment covered by the Bill of Lading. If any of the goods called for on the Bill of Lading are shorted or damaged outside of normal handling abrasions and marks, consignee should not accept them until the carrier makes a notation on the freight bill of the shorted or implied damaged. 

CONSIGNEE MUST NOTIFY FREIGHT CARRIER AT ONCE if any significant hidden loss or damage outside of normal handling abrasions and marks is discovered after receipt and request the carrier to make an inspection within 48 hours. If the carrier is unable to do so, prepare a signed statement to the effect that you have notified the carrier (on a specific date) and that the carrier has failed to comply with your request (name of person you talk to, date and time of the conversation). NOTE THAT IT IS DIFFICULT TO COLLECT FOR LOSS OR DAMAGE AFTER YOU HAVE GIVEN THE CARRIER A CLEAR RECEIPT. File your claim with the carrier promptly and support your claim with a cargo loss and damage claim form, copies of the bill of lading, freight bill, product invoice, photographs, and inspection claim given to you by inspector after inspection is done. Note that Garage Enthusiast willingness to assist in helping you process your claim does not make Garage Enthusiast responsible for collection of claims or replacement of lost or damaged materials. 

MISSING OR INCORRECT PRODUCTS/PARTS

At its discretion, BendPak will consider replacing any missing or incorrect products/parts from shipments at no charge provided consignee identifies and reports such items to the Customer Service Department within 30 days of date of receipt of order. Missing or incorrect products/parts from shipments will not be replaced if they are reported more than 30 days beyond the receipt of order.

LIMITED RETURNS / EXCHANGE POLICY 

Garage Enthusiast prides itself on a tradition of outstanding customer care and support.  Our devoted team of account representatives understands that our customers are the hallmark of our enduring partnerships. 

Our limited return and exchange policy allows you to return defective or incorrect merchandise for a full or partial credit of your order.  All returned merchandise requires authorization.  Contact our service representatives first for shipping instructions and to obtain a return authorization number.  Credit will not be issued unless authorization to return merchandise has been received. 

For all merchandise returned to Garage Enthusiast and BendPak/Ranger for reasons other than warranty, a 20% restocking fee and round-trip shipping costs will be deducted from the credit refund.  All returned items must be in their original box or crating and must include all packing material, manuals and all accessories.   


NO RETURNS, CREDITS OR EXCHANGES FOR: 
  • Returned items that failed due to an accident, purchaser’s abuse, neglect or failure to operate in accordance with instructions provided in the owner’s manual(s) supplied. 
  • Returned items that failed due to incorrect voltage or improper wiring. 
  • Returned items that failed due to rain, excessive humidity, corrosive environments or other contaminants. 
  • Any item damaged in shipment or any product failure caused by installing or operating product under conditions not in accordance with installation and operation guidelines or damaged by contact with tools or surroundings. 
  • Returned items with cosmetic defects that do not interfere with product functionality. 
  • Returned items with no accompanying RMA number and completed RMA form. 
  • Returned items that are incomplete or defaced. 
  • Any consumable or standard wear items. 
  • Returned items with a different serial number from what was authorized for return. 
  • Returned items that do not include your original receipt, invoice or sales order. 
  • Returned items that were special ordered or custom configured. 
  • Freight damaged items. If your shipment arrives damaged you must note the damage on the carrier's delivery record in accordance with the carrier's policy, save the merchandise in the original box and packing it arrived in, and arrange for a carrier inspection of damaged merchandise. 
  • Chemical Guys Products
  • SONAX Products
 
HOW TO RETURN PRODUCTS 
  • Please contact Garage Enthusiast within 14 days of your original shipment or warranty exchange for a Return Merchandise Authorization (RMA) number before returning your product to Garage Enthusiast. 
  • For faster service, please have the following information on hand when calling for an RMA number: customer name, order or invoice number, item (SKU) number and serial number (if exists) and the reason for the return.
  • No returns of any type will be accepted without an RMA number and completed RMA form. 
  • Returned items must be shipped via ground service only - do not return items by air unless authorized in writing. 
  • BendPak/Ranger:  For warranty related exchanges and/or returns, a Garage Enthusiast customer service representative will work with you to arrange to have the item(s) returned via a BendPak preferred carrier freight collect. 
  • Products returned C.O.D. will be refused. Unauthorized freight collect charges will be denied. 
  • BendPak/Ranger: Once an item arrives at BendPak, we will issue a full or partial credit, exchange or refund within 15 days.
  • Wall Control:  Once an item arrives at Wall Control, we will issue a full or partial credit, exchange or refund within 15 days.
  • Additional time may be required depending on the nature of the return. 
  • Returns must be made within 15 days of the Return Authorization being provided. Any incurred costs associated with damaged merchandise will be deducted from credits owed. Garage Enthusiast is not responsible for merchandise damaged in return shipment. We strongly recommend you package the items carefully to ensure safe passage. For non-warranty items, we suggest you fully insure your return shipment in case of loss or damage.